Tag Archives: ri

Wee Winn: Before & After

Here’s a nice little compilation illustrating what a long journey Wee Winn has been through over these months. Look and be amazed at its transformation!

DSCN3718DSCN3719DSCN3846DSCN3848DSCN3849DSCN3850

Advertisements

Wee Winn is Coming Along

Wee Winn has been progressing a lot these past several weeks. Herb has been working diligently on the boom, while Steve had made a cradle for the boat.

20170404_10424020170404_104235

20170221_150843

Meanwhile, Zach and Sandy measured out and highlighted Wee Winn’s water-line with a laser light (which was running dry on its batteries, making the process much more tedious than it should have been).

20170422_13324420170422_113951

Once everything was up to their liking, the paint job began!

20170422_13574720170422_160935

Join Us at the Frostbite Bash!

FrostBiteBash_Instagram-music-01

Please come and join the Herreshoff Museum and RELIANCE crew at the Frostbite Bash on February 6th!! There will be dancing, food, and the RELIANCE model set up in the museum in anticipation of opening day. It will be a wonderfully fun, two-for-one opportunity you can’t miss!

Winter Progress

Work has been progressing over this early winter on all the details of the rigging; the blocks, splicing, and making up the shackles are all getting done. We recently dry-fitted the main sheet system. You can see Herb in the background making a micro-splice. Poor guy!

20160105_145129

The Saturday crew has been working with extra gusto!
Laura completed all splices for the two topmast backstay runners and started the wire-manila peak halyard tail splice. Joe has been repainting the deck which, over the past two years in the shed, has become shop worn; Bern has been helping with making blocks.

Meanwhile, Burr delivered his latest masterpiece: the topmast cone assembly. You may remember that last fall, Bill fashioned the lignum vitae truck, and several years ago, Mike cast a topmast cone. Well, Burr took those pieces, machined the cone, then made the topsail halyard sheave and metal housing, and assembled everything together. We couldn’t even find the housing solder joint. So awesome!

20160109_162707

Did we mention that the average age of these guys exceeds 80?!

A Thanksgiving Feast for the Eyes

To honor the holiday upon us, we in the RELIANCE Project would like to thank all who have helped us on this long, arduous journey, as well as all the fans who have pushed us on with your words of encouragement! To give back to the community, here’s a look at the RELIANCE model, sleek and suave from its final priming!

20151125_11553320151125_11543220151125_115418

We’re going to be dabbing on a “blue-ing” film and sanding off the “orange peel” with 400-grit sandpaper very soon.